Skip to content
robrun-wikifan site
EN
Menu

Rob Run decoder calculator

Every structure at a base has its own security panel. To hack it, you install decoders until its defense drops to zero. Pick the structure, enter its fuses, and get the number of decoders, the install time and the best plan with the ones you own.

Fuses on the panel

Can’t see them? Leave 0 for the minimum, then check the maximum in the table below.

Panel defense

To bring it down
Your decoders (optional)

Enter what’s in your bag to see whether it’s enough and which mix to use.

Values from the game data read by robrun.info, not published by Kefir. The time only counts installing the decoders, not the drive or the gunfights.

How many decoders for each structure

First number: the structure with no fuses. Second number: every slot holding a legendary fuse, the maximum defense. With only a few fuses, you land in between.

StructureDefenseFusesUncommonEpicLegendary
Trailer5community1 → 5095 → 502 → 171 → 10
Small House15community1,6 → 1502715 → 1505 → 503 → 30
Grow Room5community1 → 5095 → 502 → 171 → 10
Chemical Laboratory3community1 → 3363 → 331 → 111 → 7
Workshop5community1 → 5095 → 502 → 171 → 10
Warehouse10community1 → 851510 → 854 → 292 → 17
Car Garage4community1 → 3464 → 342 → 121 → 7
Large Car Garage6community1 → 66126 → 662 → 222 → 14
Mesh Fence2community1,10 → 1732 → 171 → 61 → 4
Metal Fence5community1,10 → 3565 → 352 → 121 → 7
Concrete Fence10community1,10 → 55910 → 554 → 192 → 11

How a hack works

  • One panel per structure. House, Grow Room, laboratory, garage, workshop, warehouse and fences each have their own. The Farm Fence has none and can’t be hacked.
  • Defense is the base plus the fuses. A Trailer starts at 5 points, a Small House at 15. Each fuse adds its points in a slot of the panel.
  • Each decoder removes its points and is used up. The Uncommon one removes 1 point, the Epic 3, the Legendary 5. Each install takes 12 seconds.
  • At zero, the panel is hacked. You get limited access to the building, and the base gets a raid lock: during the raid, vendors, the Black Market and unlocking Shipments are blocked.
  • The owner repairs the panel at the panel itself. Fuses aren’t destroyed, so the defense comes back in full.

Game data collected by robrun.info, which we checked against our item pages on November 19, 2026.

Save time or keep value

Legendary decoders are fast: 30 installs take down a maxed Small House, versus 150 with Uncommon ones. But the Fence pays at least $40,000 for a Legendary, versus $1,000 for an Uncommon. So the calculator gives you two plans: the fastest, for a raid under pressure, and the one that burns the least value, when nobody is defending.

Barter barely changes the maths: 3 Uncommon decoders and $10,000 give one Epic, the same 3 points in a single install. That saves 24 seconds of installing per trade, nothing more.

Defending

  • Fill your main building first, then the ones holding what you want to keep: Grow Room, laboratory, warehouse. Prices are on the Electronic Fuse page.
  • A Mesh, Metal or Concrete Fence adds one more panel to hack before anyone walks in.
  • An Alarm System adds no points, but it warns you as soon as a hack starts. At 12 seconds per decoder, a big panel gives you time to get there.
  • Keep valuables in a safe or a security cabinet: a decoder doesn’t open them, that takes a Master Key.

Every structure is covered in the base and settlement guide.

FAQ

How many decoders does it take to raid a base in Rob Run?

Add the structure’s base defense and the points of its fuses, then divide by the points of one decoder (1, 3 or 5). A Trailer with no fuses falls to 5 Uncommon, 2 Epic, 1 Legendary. A bare Small House takes 15 Uncommon, 5 Epic, 3 Legendary, and up to 150 Uncommon, 50 Epic, 30 Legendary when its 27 slots hold legendary fuses.

Where do you get decoders in Rob Run?

No shop sells them. Uncommon and Legendary decoders drop when you search loot spots around the map. Epic ones come from barter: 3 Uncommon decoders and $10,000, or a filled Epic Action Camera. The Fence only pays $1,000 for an Uncommon decoder, so keep them.

How long does a hack take in Rob Run?

Each decoder takes 12 seconds to install, according to game data. A Small House packed with legendary fuses needs 30 Legendary decoders, about 6 minutes at the panel, long enough for the owner to show up if they have an alarm.

How do you protect your base from decoders in Rob Run?

Fill the fuse slots of every structure: an Uncommon fuse adds 1 point for $20,000, an Epic one 3 for $100,000, a Legendary one 5 for $250,000. Add an alarm, which blocks nothing but warns you, and keep valuables in a safe: a decoder doesn’t open it.

Does a decoder open safes in Rob Run?

No. A complete hack only gives limited access to the building. Safes and security cabinets inside need a Master Key, according to the game data collected by robrun.info.

The site is free and updated every week. If this tool saved you time, you can support it on Ko-fi.

Sources

  1. robrun.info, base hacking and defense, robrun.info, read on 2026-11-19 community
  2. robrun.info, Breach Decoder page (game data), robrun.info, read on 2026-11-17 community
  3. robrun.info, Epic Decoder page (game data), robrun.info, read on 2026-11-18 community
  4. robrun.info, Legendary Decoder page (game data), robrun.info, read on 2026-11-18 community
  5. robrun.info, Electronic Fuse item page (game data), robrun.info, read on 2026-11-18 community
  6. robrungg.wiki, robrungg.wiki, read on 2026-11-16 community
  7. robrun.info, Electronic Fuse Epic item page (game data), robrun.info, read on 2026-11-18 community
  8. robrun.info, Electronic Fuse Legendary item page (game data), robrun.info, read on 2026-11-18 community
  9. Our screenshot: Black Market, Construction tab (machines), Picha (in-game screenshot), read on 2026-11-16 screenshot
  10. robrun.info, building plan, robrun.info, read on 2026-11-18 community